YHZ host hydraulic lateral support device
Classification:
Keywords: Filter | Valve Remote Control Device | Marine Module | Hydraulic
- Product Description
-
YHZ host hydraulic lateral support device
YHZ M/E HYDRAULIC LATERAL DEVICEOverview Overview
The YHZ host hydraulic lateral support device is installed between the host and the strong beam of the hull structure. Its function is mainly used to reduce the natural frequency generated during the operation of the host, thereby reducing the impact of the host vibration, reducing the deformation of the hull, and improving the comfort of the ship. It is flexible with respect to the thermal expansion of the main engine and the longitudinal and lateral displacements caused by the loading of the vessel.
YHZ M/E hydraulic lateral device is installed between the engine and the hull, to reduce the natural frequencies of the engine and the impact of the engine vibration, the deformation of the hull and improve the comfort of the ship sailing. The hydraulic top bracing units are flexible to thermal expansion of the engine and various longitudinal and lateral displacement of loading conditions of the vessel.
The standard configuration of the hydraulic lateral pushing support device of the main engine is to install it on the port side (camshaft side) and starboard side (exhaust side) of the main engine respectively, and it can also be installed on the same side (same side) under special circumstances. Mainly applicable to WinGD, Wartsila and other low-speed host. Its standard installation method is 4 cylinders. According to the structure type, it is divided into two types: integral type and split type (hydraulic cylinder and hydraulic accumulator are separated, and the connecting pipe in the middle is provided by the shipyard, and the model F is indicated in the model).
The hydraulic lateral device is installed on the port side (camshaft side) and the starboard side (exhaust side) of the host machine respectively, and can also be installed on the same side (same side) under special circumstances，mainly for WinGD, Wartsila and other low-speed engine. The standard installation for the 4 cylinder. According to the structure type, it is divided into integral type and split type (the hydraulic cylinder and the hydraulic accumulator are separated, the middle connecting pipe is provided by the shipyard, and F indicates the model ).Selection parameter table
Model
TypeNominal diameter of hydraulic cylinder
The nominal diameter of cylinderPre-tightening support force Advanced pretension force
dynamic elastic support force
Dymatic elastic supportYHZ200/160A(F)
200mm
100kN
160kN
YHZ200/160B(F)
200mm
160kN
270kN
Note: F indicates split type
Related Products
Product Message
Tel:
Email:
Address:
No.6 Yongxing Road, Economic Development Zone, Nantong Gangzha, Jiangsu Province
